|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MA43000, MA44600 Series Silicon Step Recovery Diodes Rev. V5 Features * Low Transition Times * Tight Capacitance Ranges * High Voltage and Low Thermal Resistance for Higher Input Power Absolute Maximum Ratings1 @ TA=+25 C (Unless Otherwise Noted) Parameter Operating Range Storage Range Absolute Maximum -65C to +175C -65C to +200C * Lead-Free (RoHS* Compliant) Description and Applications The MA44600 series of Step Recovery diodes is designed for use in low and moderate power multipliers with output frequencies of up to 20 GHz. These Step Recovery diodes generate harmonics by storing a charge as the diode is driven to forward conductance by the positive voltage of the input signal. When the signal reverses polarity, this charge is extracted. The Step Recovery diode will appear as a low impedance current source until all the charge is extracted, then it will "snap" to a higher impedance. This causes a voltage pulse to form in the impulse circuit of the multiplier. Step Recovery diodes make excellent high order multipliers such as comb generators. They are also useful as efficient moderate power X2- X4 multipliers. 1. Operation of this device above any one of these parameters may cause permanent damage. Typical Case Styles ODS-30 ODS-134 DIE ODS-91 ODS-103 ODS-93 Maximum and Suggested Values of Snaptime (Ts) vs. Multiplier Output Frequency * High Order Narrow Band Moderate Power Multipliers (MA44600 series) * Comb Generators (MA43592, MA43543) * High Power Circuit Tested Multiplier (MA43000 Series) Environmental Performance The MA44600 and MA43000 series of diodes in ceramic packages are capable of meeting the tests dictated by the methods and procedures of the latest revisions of MIL-S- 9500, MIL-STD-202 and MIL-STD-750 which specify mechanical, electrical, thermal and other environmental tests common to military semiconductor products. Suggested Junction Capacitance vs. Multiplier Output Frequency Environmental Ratings PER MIL-STD-750 Storage Temperature Temperature Cycle Shock Vibration Constant Acceleration Humidity Method 1031 1051 2016 2056 2006 1021 Level See maximum ratings 10 cycles, -65C to +175C 500 g's 15 g's 20,000 g's 10 days Specifications Subject to Change Without Notice. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. 1 changes to the product(s) or information contained herein without notice. MA43000, MA44600 Series Silicon Step Recovery Diodes Rev. V5 Electrical Specifications @ TA = +25 C Snap Varactors Minimum Reverse Voltage2 (VR) Part Number 1 (V) MA44621A MA44631A MA44631C MA44641A 20 30 30 40 Junction Capacitance(Cj)3 Min./Max. Vr=6V (pF) 0.200-0.300 0.300-0.500 0.700-0.900 0.400-0.600 Minimum Lifetime (TL) If=10mA/ Ir=6mA (nS) 7 8 8 12 Transition Time (Ts)4 (pS) Nominal 50 70 70 90 (pS) Max. 100 100 100 150 High Power Circuit Tested Step Recovery Diodes Minimum Reverse Voltage2 (VR) Min./Max. Junction Capacitance (Cj)3 Min./Max. Vr=6V (V) MA43000 MA43002 MA43004 85-105 45-70 30-45 Part Number 1 Lifetime (TL) Min./Max. If=10mA/ Ir=6mA (nS) 250-500 75-225 20-50 Maximum Snap Time (Ts)4 Maximum Thermal Resistance (jc) (pF) 3.00-4.50 1.60-2.40 0.45-0.85 (pS) 100 100 100 (C/W) 12 25 45 Part Number 1 Case Style1 Minimum Output Power (Watts) Input Frequency (GHz) 0.333 2.000 3.300 Output Frequency (GHz) 2.000 6.000 13.000 Maximum Input Power (Watts) 15 5 2 MA43000 MA43002 MA43004 103 91 91 4.0 1.5 0.3 1. 2. 3. 4. When ordering, specify the desired case style by adding the case designation as a suffix to the model number. Case styles for the MA44600 series are -30,-91 and -93. To order chip form, add the suffix "-134" to the model number. The nominal chip size for the MA44600 series is 15 mils. Reverse voltage (VR) is measured at a reverse bias current of 10A. Junction capacitance is measured at a reverse voltage of 6V and a frequency of 1MHz. Transition time is measured between 20% and 80% points on the voltage recovery trace. Test conditions are +10mA and -10 volts. Specifications Subject to Change Without Notice. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA43000, MA44600 Series Silicon Step Recovery Diodes Rev. V5 Electrical Specifications @ TA = +25 C High Order Step Recovery Diode Varactors for Use in Comb Generation Minimum Reverse Junction Lifetime Capacitance Voltage2 (TL) (Cj)3 (VR) Min./Max. Min./Max. Min./Max If=10mA/ Ir=6mA (pS) 9-27 10-25 Part Number1 Maximum Maximum Maximum Thermal Output Snap Time Input Resistance Frequency (Ts)4 Power (jc) Case Style Vr=6V (V) MA43592 MA43543 1. 25-40 20-50 (pF) 0.20-0.30 0.20-0.55 (pS) 90 60 (C/W) 70 125 (GHz) 1.00-12.00 2.00-20.00 (Watts) 1.0 1.5 30 93 2. 3. 4. When ordering, specify the desired case style by adding the case designation as a suffix to the model number. Case styles for the MA44600 series are -30,-91 and -93. To order chip form, add the suffix "-134" to the model number. The nominal chip size for the MA44600 series is 15 mils. Reverse voltage (VR) is measured at a reverse bias current of 10A. Junction capacitance is measured at a reverse voltage of 6V and a frequency of 1MHz. Transition time is measured between 20% and 80% points on the voltage recovery trace. Test conditions are +10mA and -10 volts. Suggested Design Considerations Minimum and Suggested Values of Minority Lifetime (TL) for SRD vs. Multiplier Input Frequency Approximate Minimum Breakdown Voltage Required for SRD at Various Output Power Levels vs. Output Frequency Specifications Subject to Change Without Notice. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA43000, MA44600 Series Silicon Step Recovery Diodes Rev. V5 Case Styles DIM. A B C D E F G INCHES MIN. 0.119 0.115 0.060 0.060 0.077 0.016 0.055 MILLIMETERS MIN. 3.02 2.92 1.52 1.52 1.96 0.41 1.40 MAX. 0.127 0.129 0.064 0.062 0.083 0.024 0.065 MAX. 3.23 3.28 1.63 1.57 2.11 0.61 1.65 CP = 0.30 pF Typical LS = 0.40 nH Typical DIM. A B C D E F G INCHES MIN. 0.059 0.070 0.047 -- 0.040 0.004 0.024 MILLIMETERS MIN. 1.50 1.78 1.19 -- 1.02 0.10 0.61 MAX. 0.069 0.080 0.053 0.015 0.050 0.010 0.026 MAX. 1.75 2.03 1.35 0.38 1.27 0.25 0.66 CP = 0.15 pF Typical LS = 0.17 nH Typical DIM. A B C D E F INCHES MIN. 0.119 0.188 0.016 0.058 0.098 0.009 MILLIMETERS MIN. 3.02 4.78 0.41 1.47 2.49 0.23 MAX. 0.127 0.208 0.024 0.071 0.102 0.011 MAX. 3.23 5.28 0.61 1.80 2.59 0.28 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA43000, MA44600 Series Silicon Step Recovery Diodes Rev. V5 Case Styles DIM. A B C D E F G H INCHES MIN. 0.119 0.060 0.205 0.085 0.060 0.060 0.016 0.079 MILLIMETERS MIN. 3.02 1.52 5.21 2.16 1.52 1.52 0.41 2.01 MAX. 0.127 0.064 0.225 0.097 0.064 0.064 0.024 0.083 MAX. 3.22 1.63 5.72 2.46 1.63 1.63 0.61 2.11 CP = 0.18 pF Typical LS = 0.40 nH Typical DIM. A B INCHES MIN. 0.0135 0.0035 MILLIMETERS MIN. 0.34 0.09 MAX. 0.0165 0.0065 MAX. 0.42 0.17 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MA43543 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |